<Back Overview
- Model: TSChg 80 / TSChgG 80 / TFChg 80 / TFChG 80
Thermometers nominal size 80 mm (3") for industrial temperature measurement are available with stainless steel case, with or without case filling. Rigid stem mounting (TSChg/TSChgG 80) or capillary line between stem and thermometer (TFChg / TFChgG 63) are possible versions.
For thermometers with capillary line a mounting device is required, i.e. a gauge holder bracket or a rear flange for thermometers with bottom connection, or a u-clamp fixing device for instruments with center back connection.
The measuring system is nitrogen filled, which is nontoxic and enviromentally
safe. Various different stem and connection types and sizes
are available to suit the thermometers for all kinds of industrial
applications. The stainless steel case with crimped-on ring
suits for applications where a sealed case is required.
We supply a complete a full range of Thermowells
to suit all applications.
0°C
-50 / +80°C up to 0 / +600°C
+50 / +50°C up to -20 / +80°C
/ +300°C up to +100 / +600°C
And also corresponding °F
Accuracy Class:
1 according to DIN EN 13190.
Movement:
Brass / German silver.
Lens:
Single strength glass lens.
Stem Types:
Optional various stem types with different connection types and sizes available, e.g. plain stem or with slideable or turnable union nut, male thread connection clamp or compression fitting, welding-in connection, please compare data sheet 8230.
Stem Length:
Standard length up to 200 mm (7.87"); optional different lengths.
Min. and max. lengths have to be considered.
Stem Material:
Stainless steel.
Model TSChg / TSChgG:
With rigid stem.
Model TSChg / TSChgG:
With capillary line:
Stainless steel, diameter 2 mm, standard length up to 1 m (39.37"), buckle protection tubes at both ends.
