<Back Overview
- Model: TSCh 63 / TSChG 63 / TFCh 63 / TFChG 63
Thermometers nominal size 63 mm (2½") for industrial temperature measurement are available with stainless steel case, with or without case filling. Rigid stem mounting (TSCh/TSChG 63) or capillary line between stem and thermometer (TFCh/TFChG 63) are possible versions.
For thermometers with capillary line a mounting device is required, i.e. a rear flange with bottom connection or a front flange with center back connection. The measuring system is nitrogen filled, which is nontoxic and enviromentally safe. Various different stem and connection types and sizes are available to suit the thermometers for all kinds of industrial applications.
The stainless steel bayonet ring case suits for applications
where a sealed case with high chemical resistance is required.
We supply a complete a full range of Thermowells
to suit all applications.
0°C
-50 / +80°C up to 0 / +200°C
+50 / +50°C up to -20 / +80°C
/ +300°C up to +100 / +500°C
And also corresponding °F
Accuracy Class:
1 according to DIN EN 13190.
Movement:
Brass / German silver.
Lens:
Single strength glass lens.
Stem Types:
Optional various stem types with different connection types and sizes available, e.g. plain stem or with slideable or turnable union nut, male thread connection clamp or compression fitting, welding-in connection, please compare data sheet 8240.
Stem Length:
Standard length up to 200 mm (7.87"); optional different lengths.
Min. and max. lengths have to be considered.
Stem Material:
Stainless steel.
Model TSCh / TSChG:
With rigid stem.
Model TFCh / TFChG:
With capillary line:
Stainless steel, diameter 2 mm, standard length up to 1 m (39.37"), buckle protection tubes at both ends.
