<Back                                                   Overview
This model is suitable where a sealed case (e.g. outdoor- or wet ambient services)  and / or high chemical resistance is required.

The applications are similar to our description of model RCh / RChG. The wide bayonet ring is a typical American standard.

RCha: Dry version         RChaG: With Glycerine filling.
 
Model(s): RCha / RChaG
Case Size 63 (2½")

Download PDF Data Sheet 1210
Download PDF Data Sheet 1219.4

Requires Adobe Acrobat Reader
[ free download ]

Model RChaG 63-3, 4 bar  

Case size 63 (2½") is available with wetted parts brass/bronze, stainless steel or monel. The full chemical gauge version with stainless steel connection can be mounted to certain chemical seals.

Reed switches can be installed to this version. For electrical accessories see data sheet 1219.4
Case Size: 63 mm (2½")
Case: 304 stainless steel.
Ring: Wide bayonet ring 304 stainless steel.
Pressure Ranges: 0-0.6 - 0-1000 bar or 0-10 - 0-20.000 psi (also vacuum or compound ranges).
Accuracy: ± 1.6 % f.s.
Process Connection: ¼" BSP, ¼" NPT or M 12 x 1,5 bottom connection, lower or center back connection.
Wetted Parts: Brass / bronze all stainless steel or monel.
 
Case Sizes 100  (4")
                           160  (6")

Download PDF Data Sheet 1200
Download PDF Data Sheet 1290

Requires Adobe Acrobat Reader
[ free download ]

Model RCha 100-3, 2.5 bar  
Case sizes 100 mm (4") and 160 mm (6") are used for all kinds of industrial applications. Various electrical accessories are available, and the full chemical version with stainless steel connection can be attached to almost all our chemical seal models, see data sheet 1290.
Case Sizes: 100 mm (4")
160 mm (6")
Case: 304 stainless steel.
Ring: Wide bayonet ring 304 stainless steel.
Pressure Ranges: 0-0.6 -  0-1600 bar, or 0-10 - 0-25.000 psi with HP connection up to 0-2500 bar, or 0-35.000 psi (also vacuum or compound ranges).
Accuracy: ± 1.0 % f.s
Process Connection: ½" BSP, ½" NPT or M 20 x 1,5, et al. bottom or lower back connection.
Wetted Parts: Brass / bronze stainless steel or monel.
 
© Instruments To Industry Ltd.
Site Map   |   Enquiries   |   Tel: 0151 546 4943   Fax: 0151 548 6262