<Back                                                    Overview - Model: KPChE
Capsule gauges for low pressure model KPChE are for applications (low pressure measurement) where a small stainless steel case is required.

These gauges suit for air pressure measurement or for other gaseous media which are compatible to the wetted parts.

Capsule gauges are used e.g. from domestic gas supply companies and gas regulators, boiler or furnace manufacturers etc.
 
Download PDF Data Sheet 6211.1

Requires Adobe Acrobat Reader
[ free download ]

Model KPChE 63-1, 250 mbar  
Nom. Case Size: 63 (2½")
Case: 304 stainless steel.
Lens: Acrylic glass, snapped-in into the case.
Pressure Ranges: 0-2.5 mbar - 0-600 mbar or 0-1"WC (inch water) -
0-250"WC (also vacuum or compound ranges).
Accuracy: 1.6 % f.s.
Process Connection: ¼" BSP, ¼" NPT or M 12 x 1,5 bottom or center back connection.
Wetted Parts: Brass / copper-beryllium or stainless steel.
 
Overview - Model: PSK / PSKG
The stainless steel case of our model KPChg is provided with a crimped-on ring and acrylic glass lens. This version is available in nom. case sizes 80 (3") and 50 (2").

Capsule gauges suit for air pressure measurement or for other gaseous media which are compatible to the wetted parts. They are used e.g. from domestic gas supply companies and gas regulators, boiler or furnace manufacturers etc.
 
Download PDF Data Sheet 6203

Requires Adobe Acrobat Reader
[ free download ]

Model KPChg 80-1, -100 up to +150 mbar  
Nominal Case Sizes: 50 mm (2")
80 mm (3")
Case: 304 stainless steel.
Ring: Crimped-on ring 304 stainless steel.
Pressure Ranges: NCS 50:
0-160 mbar - 0-600 mbar
0-60"WC (inch water) - 0-250"WC

NCS 80:
0-2,5 mbar - 0-600 mbar
0-1"WC (inch water) - 0-250"WC

(also vacuum or compound ranges).
Accuracy: 1.6 % f.s.
Process Connection: NCS 50:
¼" BSP, ¼" NPT or M 12x1,5 bottom or center back connection.

NCS 80:
½" BSP, ½" NPT or M 20 x 1,5 bottom or center back connection.
Wetted Parts: NCS 50:
Brass / copper-beryllium.

NCS 80 :
Brass / copper-beryllium or stainless steel.
 
Overview - Model: KPCh
Capsule gauges for low pressure model KPCh are for applications (low pressure measurement) where a sealed case with chemical resistance is required.

These gauges suit for air pressure measurement or for other gaseous media which are compatible to the wetted parts.

Capsule gauges are used e.g. from domestic gas supply companies and gas regulators, boiler or furnace manufacturers etc.
 
Download PDF Data Sheet 6201

Requires Adobe Acrobat Reader
[ free download ]

Model KPCh 100-1, 100 mbar  
Nom. Case Sizes: 100 mm (4")
160 mm (6")
Case: 304 stainless steel.
Ring: Bayonet ring 304 stainless steel.
Pressure Ranges: 0-2.5 mbar - 0-600 mbar or 0-1"WC (inch water) -
0-250"WC (also vacuum or compound ranges).
Accuracy: 1.6 % f.s.
Particularities: Zero adjustment
Process Connection: ½" BSP, ½" NPT or M 20 x 1,5 bottom or center back connection.
Wetted Parts: Brass / copper-beryllium or stainless steel.
 
© Instruments To Industry Ltd.
Site Map   |   Enquiries   |   Tel: 0151 546 4943   Fax: 0151 548 6262